SENAO 30V214, Руководство пользователя

Страница: 18 / 26

18
Select Configuration tab to check Client for Microsoft Networks is installed as shown in Figure
3-1 . If no,
click the Add or Install button. Select Client and click the Add button.
Figure 3-1
Select Microsoft for Manufacturer and Client for Microsoft Networks for Network Client, and then
click
OK.
3-2 Checking and Adding NetBEUI
NetBEUI is a protocol you can use to connect to Windows NT, Windows for Workgroups, or LAN
Manager servers. If you work on Microsoft network environment, you need to set up NetBEUI
protocol.
Repeat the step 2 and 3 of Chapter 3-1 Checking and Adding Client for Microsoft Networks.
Select Configuration tab to check NetBEUI -> Wireless LAN PC Card is installed. If no, click the
Add or Install button. Select Protocol and click the Add button. Select Microsoft for Manufacturer
and NetBEUI for Network Protocol, and then click OK.
3-3 Checking and Adding TCP/IP
TCP/IP is the protocol you use to connect to the Internet and wide-area networks. If you want to
connect
to Internet, you need to set up TCP/IP protocol.
Repeat the step 2 and 3 of Chapter 3-1 Checking and Adding Client for Microsoft Networks.