Sena Parani-ESD100, Руководство пользователя

Страница: 49 / 61

49
B.3.30. AT+BTNAME=$ string

Response

OK

Purpose
Change device name
Parameters
$string = New device name (Default=
”
ESDV2_v2.0.0-445566
”
)
Description Parani-ESD can have a user friendly name for easy identification. The name allows up to
30 alpha-numeric characters.
Example
AT+BTNAME=
”
My-Parani-ESD
”
B.3.31. AT+BTLPM,n

Response

OK

Purpose Set low power mode
Parameters
n=0: Inactivate (Default)
n=1: Activate
Description During no data transmission, Parani-ESD can be in low power mode to save the power. It
takes a few seconds to wake the Parani-ESD out of low power mode.
B.3.32. AT+PASS=$string

Response
Remote Configuration Enabled

Purpose Input password in remote configuration mode.
Parameters
$ string = Password (Default=
”
0000
”
)
Description
Input password for authentication in remote configuration mode.
Example AT+PASS=1234
B.3.33. AT+CHPASS=$string

Response

OK

Purpose Change password used in remote configuration mode.
Parameters $ string = New password
Description
Change password used in remote configuration mode. Password length is up to 8.
Example AT+CHPASS=12345678
B.3.34. AT&V

Response

S0:m0;S1:m1;
…
Sn:mn


OK

Purpose
Display all the S-registers
Description All parameters are stored at S-register in flash memory. These values are sustained until
hardware reset.