Sena HelloDevice Pro PS100 Скачать руководство пользователя страница 54 | Manualshive

Страница: 54 / 68

Sena HelloDevice Pro PS100 Скачать руководство пользователя страница 54

54

6: System Status and Log

The HelloDevice Pro Series provides system status display and log data display for management.

System status includes Ethernet status and status of each serial port. In addition, the HelloDevice Pro

Series can be configured to deliver log data automatically by email to a specific recipient. Users can

use or configure these features by selecting menu

3.System status & log

in the main menu

screen.

---------------------------------------------------------------------------
System  status
---------------------------------------------------------------------------
Select  menu
1. Display system status
2. Display log
3. Reset incoming/outgoing statistics
4. Clear log
5. Send log by Email : Disable
  <ESC> Back, <ENTER> Refresh
----->

Figure 6-1 System status menu

6.1 Display system status

Users can view current system status by selecting submenu

1.Display system status

. System

status includes Ethernet status, serial port status and incoming/outgoing data statistics. Users can

reset Incoming/outgoing statistics by selecting submenu

3.Reset incoming/outgoing

statistics

.

---------------------------------------------------------------------------
System  status
---------------------------------------------------------------------------
Select  menu
1. Display system status
2. Display log
3. Reset incoming/outgoing statistics
4. Clear log
5. Send log by Email : Disable
  <ESC> Back, <ENTER> Refresh
----->  1

---------------------------------------------------------------------------
System  information
---------------------------------------------------------------------------
Model  No.:  PS200                       Serial  No.:  PS200-02020001

«
...
52
53
54
55
56
...
»

Содержание HelloDevice Pro PS100





































































Отзывы:

Нет отзывов