manualshive.com logo in svg

Sena HelloDevice Pro PS100, Руководство пользователя, Страница: 47 / 68

Поделиться
Скачать
Sena HelloDevice Pro PS100 Скачать руководство пользователя страница 47

 

47

 

 

Figure 4-22. Set up the cryptography method and cryptography key string 

 

4.4 Options 

 

4.4.1 Inactivity timeout 

 

The purpose of this parameter is to maintain the TCP connection state as 

Closed

 or 

Listen

 in TCP 

host modes or to close UDP virtual connection in UDP server mode unless there is any data transfer 

between the serial device and the HelloDevice Pro Series. If there is no incoming or outgoing data 

through the serial port during the specified 

inactivity timeout

 interval, the existing TCP connection or 

virtual UDP connection will be closed automatically. 

If the value of 

inactivity timeout

 is set to 0 and the host mode is set to one of the TCP modes, the 

current TCP connection is maintained unless there’s no connection close request. Although 

inactivity 

timeout

 is disabled, the HelloDevice Pro Series will check the connection status between the 

HelloDevice Pro Series and the remote host by sending “keep alive” packets periodically. If the remote 

host does not answer the packets, it is regarded that the connection is down unintentionally. Then, the 

HelloDevice Pro Series will force to close the existing TCP connection. 

If the value of 

inactivity timeout

 is set to 0 and the host mode is set to UDP server mode, virtual UDP 

connection with the first remote host that sends UDP packet to the HelloDevice Pro Series will be 

maintained forever till device is rebooted. 

 

Note: 

At least, this value should be set larger than that of 

inter-character timeout

. To prevent the unintended 

loss of data due to the session disconnection, it is highly recommended that this value is set large 

enough so that the intended data transfer is completed. 

 

4.4.2 Inter-character timeout 

 

This parameter defines the interval that the HelloDevice Pro Series fetches the overall serial data from 

its internal buffer. If there is incoming data through the serial port, the HelloDevice Pro Series stores 

data into the internal buffer. The HelloDevice Pro Series transfers data stored in the buffer via TCP/IP, 

only if the internal buffer is full or if the inter-character time interval reaches to the time specified as 

inter-character timeout

. 

Optimal inter-character timeout would be different according to your application but at least it must be 

larger than one character interval within specified baud rate. For example, assume that the serial port 

is set to 1200 bps, 8 Data bits, 1 stop bit, and no parity. In this case, the total number of bits to send a 

character is 10 bits and the time required to transfer one character is   

Содержание HelloDevice Pro PS100





































































Отзывы:

Нет отзывов