Sempre GT-WS-08s, Руководство по эксплуатации

Страница: 17 / 52

17
Start radio reception manually
When the batteries are inserted in the base station, all indications will briefly been shown in the
display. The display will also briefly illuminate and sound a beep tone.
After this, the device switches to receiving, whereby the radio wave number shows the
quality of the reception: The more radio waves are displayed, the better the reception.
As soon as the signal is received with sufficient strength, the relevant data is shown in
the display and the transmitter tower symbol is constantly displayed. This process can take a
few minutes.
Effective immediately, the weather station switches to receiving several times a day and com-
pares the displayed time with that from the time signal transmitter.
If no sufficiently strong signal is received, the base station will discontinue the receiving process
and the transmitter tower symbol extinguishes. The receiving process is started again later.
In this case, the time continues to run normally, from the start time of "00:00".
First, check whether the location of the base station is suitable, see page 20.
You can restart the receiving process again manually, see page 17, or
Wait until the base station automatically switches to receiving again later. Reception is usu-
ally better during the night.
If reception is not possible at your location, you can set the time and date manually, see next
chapter.