27
LCD backlight
1.
To activate the sleep timer function for the light, push
the
touch button
4
for approx. 3 seconds while
the light is on. The display for activating the timer will
appear on the LCD
1
.
2.
To set the amount of minutes until the light switches
off, tap the touch button again. You can choose
between 15, 30, 45 and 60 minutes.
If you select “OFF”, the light will illuminate until it is
manually deactivated.
The display for activating the sleep timer will turn off after
approx. 5 seconds.
LCD backlight
You can use the OFF/LO/HIGH slider
8
on the back of
the sunrise alarm clock to control the backlight of the LCD
1
in 3 different levels.
–
The backlight is deactivated in the “OFF” position.
–
In the “LO” position, the backlight is set to low bright-
ness.
–
In the “HI” position, the backlight is set to maximum
brightness.
Resetting the settings
–
If irregular characters appear on the LCD
1
or the
sunrise alarm clock does not respond to your entry,
push the RESET button
7
on the back of the sunri
-
se alarm clock. This will reset the microprocessor.
