Sandpiper House, Aviary Court, Wade Road, Basingstoke, Hampshire, RG24 8GX, UK
T
+44 (0) 1256 812 222
F
+44 (0) 1256 812 666
E
www.sematron.com
Making waves...
Operation Manual
Rev A. Feb 11.
Installation Instructions
RM120 Drive away Terminal
Page 5 of 19
The distribution of this document is controlled by Holkirk Communications Ltd. Print date 08/01/2011
Once suitable brackets are available (see attached drawing) these should be fitted
to the antenna roughly in the positions shown on the interface drawing with the
slide nuts provided.
Slings or ropes capable of withstanding the weight of the antenna (95kg) should
then be attached to the brackets, looped over the forks of the forklift and clamped
onto the forks to prevent them slipping off.
Raise the antenna to clear the vehicle roof by a minimum of 0.5m and manoeuvre
to the rear of the vehicle.
Whilst ensuring all cables are clear of mounting points, lower the positioner onto
the vehicle roof and line up all mounting holes.
Apply Loctite 242 or similar to all bolts and tighten to a torque of 13 – 15 Nm.
Direction of vehicle travel.
Antenna to be fitted facing this direction.
