SEM W25T, Руководство по программированию

Страница: 26 / 28

26
Tube inventory
The tube inventory visible on the display comes from the information sent
by the coin changer. This may vary depending the coin changer you have.
If you have an MDB Level 2 coin changer (3-tube or 4-tube), the inventory
sent by the coin changer to the W25T is very limited. There are only two
coin level sensors in each tube: Low & High. Between that, the coin
changer does not know how much coins there are in the tube. It is then
important to fill up the coin tube the proper manner If you need, you can
adjust this inventory manually. When you see a tube value on the display,
press on the green button. First digit will start flashing. Adjust the number
using either the red or blue button. Press green to switch digit. Once done,
press green to confirm the new value.
If you have an MDB Level 3 coin changer (MEI 5-tube or Coinco 6-tube), the
tube inventory is managed in real-time. The coin changer knows exactly
how much money there is in the tubes, no matter their respective level.
When you have such a coin changer, you cannot adjust the inventory manu-
ally like described in the previous paragraph.
Filling up the coin tubes.
The easiest way to fill up the coin tubes of your changer is to do as follow:
1. Go in the audit
2. When a tube value is visible, insert money just like a customer does.
3. Once done,
press and hold the black button on the circuit to exit .
Filling the coin tubes this way serves two purposes: First, it adjusts the coin
inventory in the audit. Second, you are testing the coin acceptance.
All coin changers give full priority to filling up the coin tubes. Only what is
in excess will be diverted to the coin box. Note that some types of coin
changers allow you to preset a value or a coin level in the tubes. Please
consult the instruction manual of the coin changer to set such a value or
coin level. The W25T has no control whatsoever on the coin level in the
tubes.