SEM The Vending Tester PRO CT3, Инструкция по эксплуатации

Страница: 23 / 32

23
Now testing level 2
Credit: $000.00
Now testing level 3
Credit: $000.00
MDB level
The simulator mode offers you two possibilities to operate a level 3
coin changer. You can test either in level 2 or level 3. The difference
between level 2 and level 3 is the way the coin changer will manage
the change remittance. In level 2, the machine will manage the change
remittance. If there is 2$ worth of change to dispense, the machine
will tell the coin changer from which tube to dispense. In level 3, the
machine will tell the coin changer to dispense 2$. The changer will
decide from which tube.
A level 2 coin changer (first MDB generation) cannot operate in level 3.
Some level 3 coin changers can operate in both levels. Therefore, we
strongly suggest you make tests in both levels when you have a level 3
coin changer. Once in simulation mode, press on the MDB level button
to change level.
Scaling factor
In Canada and in the USA, the scaling factor is 005. You can make sure
your CT3 is properly set at 005 by pressing once on the MDB Level but-
ton when no device is attached. If it is not, change it using the same
method as the price changing method seen on the previous page.
Other scaling factor may apply if you are located outside North Amer-
ica. Check with your coin changer supplier for the exact factor before
changing the current setting.
Decimal place
In North America, the decimal place is 2. You can make sure your CT3
is properly set at 2 by pressing once on the MDB Status button when
no device is attached. If it is not, change it using the same method as
the price changing method seen on the previous page. Wrong setting
may cause inaccurate display of money inserted. (i.e. 1.25$ will be
seen as 1.3$)