E-4
DIGITAL CLOCK FUNCTION
- The set has a built-in digital clock, which is displayed in 2 situations:
(1) When the set is in “standby mode”. (The display will automatically always show the
current time).
(2) When the set is in “on mode” (the blue light of the display is “on” in this mode, to
indicate that the set is powered “on”). In this situation the LCD display normally
does not automatically show the current time. But you can press the “display” key
(on remote control) at anytime, the current time will be displayed on the LCD screen
for 5 seconds.
HOW TO SET CORRECT TIME:
Switch unit to “stand-by” mode
Press
Stop/ Clock
(on remote control) or
Clock Set
(on unit)
display shows
12
24
FLASHING
hour or
12
24
FLASHING
(flashing)
Press Next or Back to select 12-hour or 24-hour clock display
system & press
Stop/ Clock
(on remote control) or
Clock Set
(on unit) to
confirm your selection
Press Next or Back repeatedly to set the correct Hour
in the display & press
Stop/ Clock
(on remote control) or
Clock Set
(on unit) to confirm
Press Next or Back repeatedly to set the correct
Minute in the display & press
Stop/ Clock
(on remote control) or
Clock Set
(on unit) to confirm
Correct time is now set & will be shown in the display!
DIGITAL CLOCK
