E-14
SPECIFICATIONS & SETUP
iPod/ iPhone/ iPad REAR SUPPORT STAND
This unit is designed to allow you to connect an iPod/ iPhone/ iPad without the need for dock
connectors. The design of the unit has been structured to provide support to the connect or
under normal usage without excessive pressure on the iPod/ iPhone/ iPad when controlling
playback using the iPod/ iPhone/ iPad screen.
- iPod rear support stand can be adjusted by the “screw-control” which is located at the back
of the rear support stand.
- Rotate the “screw-control” in clock wise, to stretch out the rubber pad.
- To reverse the rubber pad backward, simply rotate the “screw-control” in anti-clock wise.
- Insert the rear support stand back to the cavity gently after adjusted the rubber pad level
as desired.
DOCKING PLATFORM COVER
This unit is designed to allow you to connect an iPod/ iPhone/ iPad with or without most
cases, specifically those for the iPad. simply place or remove the docking platform cover
based on your iPod/ iPhone/ iPad.
Side of the support stand
Screw-control
rubber pad
Back of the rear support stand
Rotate the screw-control clock wise
Screw-control
Rubber pad
stretch out
Side of the support stand
