SEM 9900X, Руководство пользователя

Страница: 26 / 52

26
Copier parameters -- # 3 of 6
The copier parameters menu enables you to adapt your Vend Station to your
copier. The copier type may be followed by other settings you may need to
adjust. Also, copier type will vary if you have the standard parallel or the
smart interface on your coin-op. The type of copier you need to program
into the settings is indicated on a label that is attached to the cable coming
from the station and going to the copier.
Copier Type with Standard Interface (see page 11)
The 9900X Series Vend Station offers you an easier way to connect and
program your Vend Station. You just have to program the copier type ac-
cording to the specifications on the communication harness. (see page 12)
Programming a copier type other than the one prescribed on the harness
may result an erratic behaviour, including giving out free copies. At the time
of printing of this manual, the following types of copiers are available:
Important notice:
Make sure copier is set B&W by default not Auto-detect. If set on Auto-
detect and if there is a trace of colour on the original document, the copier
will send the colour debit signal thus charging a premium price instead of
B&W price and also resulting in wrong change given out if any.