background image

For NATIONWIDE SERVICE call 1(800)225-9293 

 

 

19 

 

DAILY MAINTENANCE 

 
 
 

Warning  

Do not dismantle or repair the product. Sharp cutters inside  
may cause injury. Opening or removal of covers allows you  
to access dangerous moving parts and live parts inside and  
accessing such parts may cause injury. 
 
 
 
 

 

 

 

 

Caution

 

 

 

Always pull out the plug before cleaning or 
Performing any type of maintenance to avoid     
Electric shock. 

Do not use oils or sprays on the shredder.  
It may cause a fire or explosion.  

Do not use water for cleaning the shredder. 
It may cause electric shock.            

Do not use polishing powder, thinner, 
petroleum-based products or aerosols of any 
kinds on or near the shredder at anytime. It may  
cause damage, deformation, discoloration or flaw. 

 

 

 

 

Procedure 

Pull out the plug before cleaning or performing any type of maintenance. 
Clean the shredder cabinet with dry and soft cloth. If there is heavy stain on a cabinet, 
soak a soft cloth into a neutral detergent, squeeze it and wipe the stain out with it. Then 
wipe the cabinet with dry soft cloth. 
Note: For your safety, maintenance and cleaning should be limited to the exterior of 
shredder.  

 
 

 

Содержание 1201P





































Отзывы: