background image

Model 0200 – POP-0120 Rev 0 

508.366.1488 | www.semshred.com 

 

Disclaimers 

 

Every care has been taken by the staff of SEM in compilation of the data contained in all training and 
informational materials (“collateral”) and in verification of its accuracy when published; however, the content of 
this collateral is subject to change without notice due to factors outside the control of SEM and this collateral 
should therefore be used as a guide only. The products referred to in these publications are continually 
improved through further research and development, which may lead to the alteration of information contained 
in this collateral. SEM does not accept any responsibility whatsoever for misrepresentation by any person of the 
information contained in this collateral and expressly disclaims any and all liability and responsibility to any 
person, whether a reader/viewer of this collateral or not, with respect to claims, losses, damage, or any other 
matter, either direct or consequential, arising out of or in relation to the use and reliance upon any information 
contained or products referred to in this collateral. SEM does not warrant that the equipment will work properly 
in all environments and applications, and makes no warranty or representation, either implied or expressed, 
with respect to the performance, throughput, or maintenance requirements of the machine. Performance, 
throughput, and maintenance requirements vary depending on screen size, feed rate, and media type as well as 
operational procedures. Information in this collateral is subject to change without notice and does not represent 
a commitment on the part of SEM. SEM assumes no responsibility for any inaccuracies that may be contained in 
this collateral or any omissions that may have occurred. SEM makes no commitment to update or keep current 
the information in this collateral and reserves the right to make improvements to this collateral and/or to the 
products described therein at any time without notice.  

 

Proprietary Information: 

This document contains proprietary and confidential information of SEM, and shall not 

be used, disclosed or reproduced, in whole or in part, for any purpose, without the prior written consent of SEM. 
Title in and to this document and all information contained herein remains at all times in SEM. This information 
is exempted from disclosure under FOIA, as amended. 

 

 

 

 

 

 

 

 

 

Содержание 0200 OMD










Отзывы: