25
Step 10: Attach Belt Swings and Acro Swing
A:
Using 1 Threaded Clip per rope, join the clip to the Acro Rope and then that clip through the Acro Bar. (fig.
10.1) Attach 1 Threaded Clip to each Acro Handle and then through the first clip as shown in fig. 10.2. Make
sure to close the Threaded Clips tightly using an adjustable wrench.
B:
Insert flexible Swing Hanger Cover over hook. (fig. 10.3)
C:
Slide Swing Hanger Cover around hook until at top. (fig. 10.4)
D:
Hook each swing and acro rope onto hook. (fig. 10.5)
E:
Twist and flex Swing Hanger Cover onto open end of hook. (fig. 10.6)
2 x Belt Swing
2 x Acro Handle
1 x Acro Rope with Threaded Clips (4 pk)
1 x Steel Acro Bar 14-1/2” - Green
8 x Plastic Swing Hanger Covers
Other Parts
Bolt Protrudes
Bolt
Nut
x
Bolt is Flush
Nut
Bolt Protrudes
Bolt
Nut
x
Bolt is Flush
Nut
Fig. 10.4
Fig. 10.5
Fig. 10.6
Fig. 10.3
Fig. 10.1
Fig. 10.2
Before playing, check that all hardware is tightened
correctly and no bolt threads are protruding. To prevent
these sharp edges, we have provided extra flat washers
that can eliminate this condition. Periodically check
hardware and tighten if required. Add an additional
washer if bolt threads start to protrude.
www.selwoodproducts.com
Содержание A25190
Страница 3: ...www selwoodproducts com...
Страница 4: ...4 www selwoodproducts com...
Страница 6: ...Square Assembly 6 www selwoodproducts com...
Страница 27: ...NOTES 27 www selwoodproducts com...
