SELWOOD A25190, Руководство по сборке

Страница: 23 / 28

Step 8M: Connect Monkey Ladder Assembly to Fort
(Meadowside Fort Only)
Hardware
2 x 5/16 x 3” Hex Bolt (5/16” lock washer, 5/16” flat washer, 5/16” t-nut)
2 x 5/16 x 1-1/2” Hex Bolt (5/16” lock washer, 5/16” flat washer, 5/16” t-nut)
G1
G10
Fig. 8.4
2446
Swing Rail Assembly
G1
G10
G10
2447
G1
A: Remove previously installed hole plugs from both SW Mounts (2446, 2447), as shown in fig. 8.3.
B: Attach the Swing Rail Assembly to the outside face of (2446) SW Mount using 1 (G10) 5/16 x 3” Hex Bolt (with
lock washer, flat washer and t-nut) in the top hole of the Triangle Plate and 1 (G1) 5/16 x 1-1/2” Hex Bolt (with lock
washer, flat washer and t-nut) in the bottom hole, as shown in fig. 8.4.
C: Repeat bolt installation for (2447) SW Mount as shown in fig. 8.4.
Fig. 8.3
Hole Plugs
Hole Plugs
23
www.selwoodproducts.com