GB
Transmitter programming procedure
80
4.)
Group separation
A group is an arrangement of several receivers which can be
controlled using one send channel.
If this group is divided
with the aim of assigning
a specific send channel
to each receiver, group
separation has to be
initiated.
During group separation,
each motor moves once
only, for 3 seconds, in
the space of approx.
2 minutes in a time slot
determined according to a random principle. If the motor is
stopped by any transmitter, this is learnt into the receiver.
If you would like to separate the receivers from a group which
have been learnt into a transmitter, proceed as follows:
Disconnect from the power supply
The receivers acknowledge the disconnection by means of a
brief movement of the motor.
3 sec.
disconnect
from the
supply for
3 seconds
connect
to the
supply for
3 seconds
disconnect
from the
supply for
3 seconds
connect
to the supply
Содержание i-R Marki Send Plus
Страница 42: ...Notizen D 42...
Страница 84: ...GB Notes 84...
Страница 128: ...F Notices 128...
Страница 170: ...NL Notities 170...