c
17
During the first 3 running hours do not accelerate too
much, and during the following navigation hours you
can accelerate properly but only for short periods.
After about 20 hours you have to change entirely the
gearbox-oil (see the greasing sectioning this
manual).
A good running in will allow you to obtain a good
performance from your motor and a longer endurance of it.
STOPPING PROCEDURE
Emergency stopping procedures.
In an emergency you must stop your motor by pulling
the engine stop switch lanyard.
To start the motor again you have to install the lock
plate again on the engine stop switch.
Picture No. 46.
Stopping in normal conditions
Place the gear-shift lever in the neutral position " N " (neutral
gear); accelerate lightly in order to avoid flooding, run the
engine again at idling speed and then push the stop button.
Picture No. 47.
Stopping for a long period of storage.
If you will not be using the motor for several days, you should
stop the engine in the following way:
Run the engine at idling speed, place the gear-shift lever in
the neutral position " N "and keep the choke knob pulled until
the engine stops.
