10
CONTROL FUNCTIONS
Security switch / Push-button to stop the motor.
Pressing the stop button (red) the ignition circuit is broken and
the engine stops immediately.
Picture No. 17.
Choke knob.
Pulling this knob supplies a rich mixture required to start a cold
engine.
Picture No. 18.
Fuel joint
Connecting the fast fuel joint, you connect the fuel hose to the
fuel tank.
Picture No. 19.
Recoil starter handle.
Pulling this handle starts the engine.
Picture No. 20.
Throttle-control adjustment.
Device which permit to have a constant speed.
Picture No. 21.
Accelerator-grip/steering-handle.
Turn the grip to operate the accelerator, and move it sideways
to adjust the steering angle.
Picture No. 22.
Cowling lock lever.
Moving this two levers upwards locks the top cowling. To
remove the top cowling push the cowling lock levers
downwards
Picture No. 23
Motor tilt cam
You use this to bloc and unblock the engine in the tilt position
Picture No. 24.
Clamp-screws.
Use them to clamp the outboard motor on the transom
Picture No. 25.
Steering adjustment grip.
With it you can adjust the resistance to steering movement.
Screw it to increase resistance.
Picture No. 26.
Trim angle adjusting-rod.
It can be positioned in different holes in order to obtain the
appropriate trim angle.
Picture No. 27.
