Fil-Pilote Mode (only for models equipped with "Fil-Pilote" feature)
In this mode the device is managed by a remote control unit.
1.Press the
key until the corresponding icon is shown on the display.
[Mode]
2.Use the
and
buttons to select the desired temperature.
[+]
[-]
The remote Fil-Pilote control unit will configure the operational mode. The device operates
with the most advanced “Fil-Pilote” system with six commands, which allows the following
functions
1. Stand-by:
power off the heating element, the device remains active.
2. Comfort:
maintains the “Comfort” temperature set by the user.
3. Eco:
maintains the room temperature 3,5°C below the “Comfort” temperature.
4. Antifreeze:
maintains the room temperature at 7°C.
5. Comfort-1:
maintains the room temperature 1°C below the “Comfort” temperature.
6. Comfort-2:
maintains the room temperature 2°C below the “Comfort” temperature.
NOTE: When this operating mode is activated on models not equipped with the “Fil-Pilote”
feature, the device will operate in “Comfort” mode.
Key lock
This function allows locking the buttons of the device to avoid inadvertent modifications of the
settings.
All the keys are disabled except the
button.
[On/Stand-by]
Press together the
and
keys for 3 seconds to activate this mode.
[Mode]
[+]
To unlock the buttons repeat the procedure.
ECO Mode
In this mode the selected temperature is reduced of 3°C, independently by the other device
settings. This function allows reducing the energy consumption.
To activate/deactivate the “ECO” mode, press the corresponding
key.
[ECO]
In "ECO" mode, the “Mode” LED turns amber.
ASC FUNCTION
To enable the "ASC" function press the
key until the "Crono" icon is shown on the
[mode]
display.
-press simultaneously the keys
and
for at least three seconds.
[ECO]
[+]
-To disable this function, repeat the procedure.
OPEN WINDOW DETECTION FUNCTION
Press together the
and
keys for more than 3 seconds to activate the ”Open Window
[ECO]
[-]
Detection” function. To deactivate the function repeat the procedure.
The “Open Window Detection” function enables detecting of an open window by sensing a
sudden decrease of the temperature in the room. In such a case, the device deactivates the
heating element for a maximum of 30 minutes or until an increase of the room temperature
reveals that the window has been closed. At the end the device returns to the previous
operating mode.
Page 13
Selmo
Electronic
Via Pacinotti, 24 - 35030 Rubano
www.selmo.it
(PD) Italy- Tel 049.8976761, Fax 049.8976085 -
Selmo
Electronic
Via Pacinotti, 24 - 35030 Rubano
www.selmo.it
(PD) Italy- Tel 049.8976761, Fax 049.8976085 -
“SMART Plus Program ”
Electronic control for towel heaters
ENG
Comfort technology division
Selmo
Release 02 - June 2018
