Comfort Mode
The "Comfort" temperature corresponds to the desired temperature for the
room.
-Press the
key until the "Comfort" icon is displayed.
[Mode]
-Set the desired temperature using the
and
keys.
[+]
[-]
In "Comfort" mode, the “Mode” LED turns red.
Night Mode
The "Night" mode sets a value of temperature to a lower value than the one set
for the "Comfort" temperature.
It is suggested to use this operating mode during the night or when the room is
not occupied for 2 or more hours.
-Press the
key until the display shows the " Night" icon.
[Mode]
-Set the desired temperature using the
and
keys.
[+]
[-]
In "Night" mode, the “Mode” LED turns green.
Antifreeze Mode
In "Antifreeze" mode the device activates the heating element when the room
temperature falls below 7°C. It is suggested to set this operating mode when
the room is not occupied for several days.
-Press the
key until the display shows the "Antifreeze" icon.
[Mode]
In "Antifreeze" mode, the “Mode” LED blinks green.
Boost 2h Mode
The "Boost 2h" can be used for quickly warming the room.-To activate the
“Boost 2h” mode, press the corresponding key until the "2h" icon is
displayed.To exit this mode, press either the
key or the
[Boost 2h]
[On/Stand-
by]
key.
For safety reasons, the temperature will be automatically limited to 32°C.
In “Boost 2h” mode, the “Mode” LED blinks red.
Page 11
Selmo
Electronic
Via Pacinotti, 24 - 35030 Rubano
www.selmo.it
(PD) Italy- Tel 049.8976761, Fax 049.8976085 -
Selmo
Electronic
Via Pacinotti, 24 - 35030 Rubano
www.selmo.it
(PD) Italy- Tel 049.8976761, Fax 049.8976085 -
“SMART Plus Program ”
Electronic control for towel heaters
ENG
Comfort technology division
Selmo
Release 02 - June 2018
