background image

Night mode

By selecting this mode, the unit will keep the room at the set night temperature. The desired night
temperature setting is as follows:
1.Press the

button until the corresponding icon appears on the display. 2.Select the night level

[mode]

temperature using the

and

buttons.

[+]

[-]

Antifreeze mode

Selecting this mode will set the room temperature to 7 ° C. Press the

button until the

[mode]

corresponding icon appears on the display.

Chrono mode

In this mode, the ambient temperature is maintained at the comfort level or at the Nightly level
according to time slots programmed as desired by the user.
1. Press the

button until the corresponding icon appears on the display.

[mode]

2.Press

button to choose P1, P2, P3 programs

[Chrono]

For programming see paragraph 4

ECO Mode

This mode lowers the set temperature of 3 ° C regardless of other radiator settings.
T

.

o activate / deactivate the function, press the dedicated

button

[ECO]

Key Lock

It is possible to lock the device to the "On / Stand-by" button to avoid improper or involuntary use, such
as protecting children or in a public space.
To turn on / off the keypad, press the

button for 5 seconds.

[mode]

Adaptive Starting Control ASC *

This function, if activated, will turn on the radiator in advance of the programmed (Max 2 hours) to
ensure that the room has reached the desired temperature at the set time.
Notes: The function takes at least a couple of days to reach maximum efficiency.

Open Window Detection” function *

The “Open Window Detection” function enables detecting of an open window by sensing a sudden
decrease of the temperature in the room. In such a case, the device deactivates the heating element
for a maximum of 30 minutes until at which point the radiator will resume to operate in the previously set
state.
When this function is enabled, the “Open Window” icon is shown on the display.
When the device detects that the window is potentially opened, the “Open Window” icon starts blinking
When the function is disabled the “Open Window” icon is not shown on the display.

[*] To activate the functions, refer to paragraph 4

Selmo

Electronic

Via Pacinotti, 24 - 35030 Rubano

www.selmo.it

(PD) Italy- Tel 049.8976761, Fax 049.8976085 -

Selmo

Electronic

Via Pacinotti, 24 - 35030 Rubano

www.selmo.it

Rev.02 - June 2018

“Infinity PLUS”

Electronic control for electric radiators

Comfort technology division

Selmo

EN

Содержание Infinity PLUS












Отзывы: