8
CALIBRATION PROCEDURE
1. Turn on the scale by holding the ON/OFF
key. (If the scale does not turn on, plug in the
ac adapter because the battery may be low.)
2. Once on hold SWITCH
and PRINT
key to enter the indicator settings mode
3. The display will show [
F
1
] to indicate F1 settings mode, use the STORE key to
change to [
F 2
]
4. Press the PRINT
key to select and enter the F2 settings mode
5. The display will read [
SCALE1
]
6. Use the arrow keys to select which scale/pad you will be calibrating (1-4)
7. Press the PRINT
key to select and enter the next setting
8. The display will read [
CAL-0
], use the STORE key to change to [
CAL-1
]
9. With nothing on the scale/pad press PRINT
to Zero Calibrate, the indicator will count
down from
9-0
and enter the next parameter if no errors
10. The display will show [
SPAN-0
] use the STORE key to change to [
SPAN-1
], press
the PRINT
key to select and enter the calibration setting
11. Use the arrow keys to enter the weight of the calibration weight you will be using
(calibration weight must be at least 40% of the scale/pads capacity)
12. Load the calibration weight on the pad/scale you are calibrating
13. Once stable
press the PRINT
key to calibrate
14. The indicator will count down from 9-0 and move on to the Save parameter [
SAVE-0
]
15. Press STORE to change to [
SAVE-1
], then save your calibration by pressing PRINT
16. The indicator will display [
F 2
], Press CHECK
to exit the settings mode and go
back to the weighing mode
17. The display will show the value of the calibration weight on the scale
18. Unload the scale; the display should read [
000000
]
19. If no errors the scale has now been calibrated
20. Repeat process until all pads/scales have been calibrated and saved
