41
among from the blocks by using the direction buttons, and press [ENT] to select (red
colored O) or cancel (blue colored -) specific blocks. After selecting all the blocks for
the motion detection, press [ESC] to escape from the “EDIT” mode and to go to the
four options below. Select “SAVE” and press [ENT] to save the selected blocks.
ALL: Select all blocks
CLEAR: Cancel all blocks
EDIT: Select/Cancel blocks
SAVE: Save and Exit
Caution: If you select “CLEAR” and save it by pressing [ENT], then the Self-Guard
does not record any images even if there is a motion, because no area is selected for
the Self-Guard to detect the motions. Accordingly, be sure to select at least one block
in order for the Self-Guard to detect and record the images.
4-2-2. AUDIO SET (SG-200, SG-210, SG-300, SG-310 only)
42
This function turns on and off audio recording function, and you can select either a
built-in microphone or an external microphone. When you turn on “3.EXT MIC”, be sure
that there is an external microphone connected to the external microphone input port to
record audio. Set off “1.AUDIO” to record video only.
4-2-3. SIZE (Image Resolution for Recording)
This function adjusts the resolution of images. The ranges of the resolution are
128x128, 160x128, 240x240, 320x240, 480x480, and 640x480 pixels.
4-2-4. ZOOM
When this function is set to ON, and recording with built-in camera(s), then you
can record images with a Zoom-In function. This Zoom-In function can be used
for the image resolutions of 128x128, 160x128, 240x240, and 320x240. In
128x128 and160x128, you can magnify by 16 times of the image recorded, and
by 4 times in 240x240 and 320x240.
4-2-5. OVERWRITE (Overwrite when memory is full)
If you set this Overwrite function to on, then the oldest file in dates gets replaced by the
new file being recorded, enabling the Self-Guard to continue to record when the
memory is full. If this function is off, and the memory is full with the existing files, then
the Self-Guard stops from recording the images, and returns back to the initial menu
mode, displaying “STOP! MEM FULL” on the LCD screen. Press any button to remove
this message from the screen. If “1.AUTO OFF” (“4. OPTION” mode
→
“
6
.
OHERS”
→
“3.POWER SET”) is not set to “0 minute” but instead, set to “1-9 minutes”, then the
Self-Guard automatically turns off its power after selected time gets elapsed.
BUILT-IN
RS-MMC
USB
Types of
Memory
Built-in Flash
Memory
Additional Memory Card
USB Memory Stick or
USB Hard Disk
Memory Usage Sequence when “OVERWRITE” is “ON”
BUILT-IN
RS-MMC
USB
Memory Usage Sequence
O
-
-
BUILT-IN
→
BUILT-IN
O
O
-
BUILT-IN
→
RS-MMC
→
BUILT-IN