Selectronic Australia LD250-24, Руководство пользователя

Страница: 7 / 8

Product Warranty Conditions LD250 24 Volt Specifications
Inverter Type Microprocessor control circuit with PWM full bridge power
stage. True sine wave AC output
Warranty
Selectronic Australia Pty Ltd warrants your inverter to be free from
defects in materials and workmanship under normal use and
service, for an initial period of two (2) years. Defective parts will
be replaced or repaired free of charge within this period.
Conditions
This warranty is applicable only from the date of original purchase.
The provision of this warranty shall not apply if the unit has been
subject to misuse, neglect, act of God, accidental damage or has
been used for a purpose for which it is not intended.
Unauthorised modification or repair will void your warranty.
To ensure a smooth and speedy response to your warranty claim,
please complete and return your reply paid warranty card within 30
days from date of purchase.
Within Australia & New Zealand
The inverter must be returned, at the owner’s cost, to an authorised
service centre listed in this manual. There will be no charge for the
return of the inverter.
Outside Australia & New Zealand
Product purchased for use outside Australia & New Zealand must
be returned to Selectronic Australia’s Service Centre to enable
warranty claims to be processed. Freight cost to be borne by the
customer. No charge will be made for the product return.
Current draw from Battery
Condition Amperage
Inverter ON, with no Load
Maximum Continuous Load (240 Watt)
Surge rating (700 Watt)
0.42 Amps
12.0 Amps
35 Amps
Inverter Power Ratings @ 25
º
C
Total Inverter output Condition
Wattage @ 1.0pf Current
Continuous
Half hour rating
Surge rating (3 seconds)
250 Watt
320 Watt
750 Watt
1.04 Amps
1.3 Amps
2.8 Amps
Battery Voltage Range Voltage
Low DC Volts Cut Out–10 second delay
Low DC Volts Cut In
High DC Volts Cut Out–Instantaneous
22 volts
24 volts
34 volts
Miscellaneous Specifications
Reverse Polarity Protection
Output Voltage Accuracy 0-350 watts
Output Frequency
Total Harmonic Distortion
Operating Temperature Range
Socket Outlet
Chassis
Full Electronic Protection
± 4% @ 12 volt input
50Hz ± 0.01%
<4%
-10º C to 50º C
10 Amp Single Pole
Powder Coated Zinc Steel
Selectronic Australia LD250 Manual
11
Selectronic Australia LD250 Manual
12