Control Remoto Inteligente Universal
9
7. About 14 commands can be stored in this remote
control.
Other Functions
A.
Display the Device Code:
The device code, which has been set up in your new
remote control, can be called up
as follows:
1.Press the SET key and hold it down, now actuate
number key “1” to display the 100th position of the 3-
digit code. Count the numbers the LED flashes. If the
LED doesn’t flash, that means the digit is ZERO.
2.Similarly, press the SET key and hold it down, at the
same time actuate number key “2” to display the 10th
position of the 3-digit code.
3. Press the SET key and hold it down, at the same time
actuate number key “3” to display the 1st position of 3-
digit code.
Example for Code 028:
a. Press SET and
“
1”, LED flashes 0 time, no flashes.
b. Press SET and
“
2
”
, LED flashes 2 times.
c. Press SET and
“
3
”
, LED flashes 8 times.
B.Reset / Delete Function:
To delete the codes which have been set up in the remote
control, press and hold down the
SET
key, then press the
“
0
”
key simultaneously for more than 3 seconds and then
release the both pressed keys. The LED will flash twice
and all the set up data and all learn commands in the
remote control are deleted.
Remark:
Please don’t operate this function if you don’t want to
delete all the settings.
