MANUAL DE INSTRUCCIONES CÓDIGO 80340 REV A
Mayo 2019 (Sujetas a modificaciones sin previo aviso)
Pag.: 9
J
.P. SELECTA s.a.u.
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
Tel 34 93 770 08 77 Fax 34 93 770 23 62
e-mail: [email protected] - website: http://www.jpselecta.es
1 Preface
This instruction manual provides all the necessary information regarding:
· Use of the refrigerator
· Technical specifications
· Installation and handling
· Operator procedures and instructions
· Maintenance operation
The manual is to be considered an integral part of the refrigerator and should
be stored in a safe place for father consult to permit a good working life of the
refrigerator.
The manufacturer cannot be held liable in the following cases:
· Improper installation (not in accordance with the guidelines indicated
herein)
· Misuse of the refrigerator
· Power supply defects
· Improper or inadequate maintenance
· Manipulation or modification without authorization
· Use of non-original spare parts
· Partial or total failure to comply with the instructions
All electrical equipments can be hazardous to health. Current standards and legal
requirements must be complied during the installation and use of any equipment.
2 Packing List
· Refrigerated cabinet
· Set of keys for the lock
· 3 trays with supports
3 Use of the equipment
These refrigerators are for preserving samples or products that require preserva-
tion below room temperature, with an in-built refrigerated unit.
The operating temperature for refrigeration is:
· b1ºC and +8ºC at room temperature of +25ºC and 60% HR.
4 Technical features
The refrigerator is a ventilated system, the evaporator is in a separate insulated
box on the top.
All the materials used in the manufacture of this unit are guaranteed to be suit-
able for use with samples.
The refrigerating circuit are in compliance with the current standards.
5 Operating principle
The gas in the refrigerating circuit is in the first time compressed, liquefied and
then evaporated in the ventilated evaporator, situated on the top of the equip-
ment.
This cycle involves the absorption of heat from the air in the cooling compartment
to cool it. The heat produced is then dissipated to the outside environment by
a condenser unit located on the top of the refrigerator.
