5
BEFORE USING
1. Carefully unpack the popcorn popper and all parts. Remove all packaging materials, including any stickers or labels.
2. Hand wash the kettle and popcorn tray in warm soapy water.
DO NOT SUBMERGE THE KETTLE, KETTLE PLUG OR THE
POPPER IN WATER OR ANY OTHER LIQUID.
Rinse and dry thoroughly.
DO NOT PLACE THE PLASTIC POPCORN TRAY IN
THE DISHWASHER. THE PLASTIC MATERIAL COULD DEFORM AND NOT PROPERLY FIT THE POPPING BASE.
3. To clean the interior and exterior surfaces of the popper, wipe and clean with a soft dry cloth.
NEVER IMMERSE THE POPPER OR
CORD IN WATER OR ANY OTHER LIQUID.
4. Position the popcorn popper on a dry, level, heat-resistant surface.
5. It is recommended to operate this appliance on a separate outlet and circuit from other appliances to avoid overloading the circuit.
ASSEMBLING THE POPPER
This popcorn popper and kettle require some assembly. Be sure all parts are properly assembled before use.
1. Holding the steel kettle at an angle, position the kettle inside the popper. Securely mount the notches on the kettle posts into the
metal brackets inside the popper (Figure 1, step 1a). Rotate the kettle so the gear on the kettle center post engages with the gear
on the top inside of the popper (Figure 1, step 1b).
2. Insert the internal kettle plug into the socket on the top inside of the popper (Figure 2).
3. Insert the kettle handle through the hole in the outside of the popper and into the notch on the kettle post (Figure 3).
4. Place the popcorn tray in the bottom of the popper (Figure 4).
Figure 3
Figure 1
(steps 1a & 1b)
Figure 2
Figure 4
