2. INPUT
Thermocouple:
J,K,T,R,S,C,E,B,N,L,U,W,Platinel II.
RTD:
PT100.
Signal inputs:
-5
to 56
mV, 0
to
10
VDC, 0
to
20
mA
DC
(Programmable scale type)
200 ms.
O
1/0.1 for TC/RTD.
1/0.1/0.01/0.001 for Analog input.
(Decimal point position)
O
+0.25% of span or 1 whichever is greater.
(20min of warmup time). Cold junction calibration
o
accuracy in TC mode + 5 C.
OFF, 1 to 99 sec.
Led Status
Annunciators
Input
Sampling time
Resolution
Indication accuracy
Digital filtering
1. TECHNICAL SPECIFICATIONS
1. DISPLAY
Display
Main output (1)
Alarm output ( 2, 3)
Manual output (M)
Tune (T)
3
Specifications
3. OUTPUT
3.1. Control Output
Rating: 5A @250 VAC or 30 VDC.
Life expectancy: 100000 cycles at maximum load rating.
12 VDC.
Range: 0 -20 mA DC, 4-20 mA DC (Factory set)
Action: Control.
Update rate: PID Update - Every Cycle time.
Analog Output - 100 msec.
Maximum output load resistance: 500E.
Range: 0-5 VDC, 0-10 VDC.(Factory set)
Action: Control.
Update rate: PID Update - Every Cycle time.
Analog Output - 100 ms.
Minimum output load resistance: 10K.
Relay contact output
SSR drive voltage output
(optional)
Current output (Optional)
Voltage output (Optional)
PID500 - 48 X 48 -
Dual 4 digit 7- segment LED
.
Upper display : 10mm high Red (process value)
.
Lower display : 7mm high Green (selectable)
.
PID110 - 48x96 -
Dual 4 digit 7- segment LED
.
Upper display : 10mm high Red (process value)
.
Lower display : 7mm high Green (selectable)
.
PID330 - 96x96 -
Dual 4 digit 7- segment LED
.
Upper display : 14mm high Red (process value)
.
Lower display : 10mm high Green (selectable)
.
