Selden Furlex 204TD Скачать руководство пользователя

Страница: 43 / 44

Seldén Mast AB guarantees the Furlex-system for 2 years. The guarantee covers faults arising from defective

design, materials or workmanship.

The guarantee is only valid if the Furlex-system is assembled, operated and maintained in accordance with this

manual and is not subjected to loads in excess of those indicated in the brochure and instructions.

Complete shipment and warranty conditions are to be found on Seldéns website www.seldenmast.com.

See Resources/Partners information/General information/General conditions of sale (595-546-E).

If the system is repaired by anyone other than Seldén Mast AB or one of our authorized dealers, the guarantee

ceases to be valid.

Seldén Mast AB reserves the right to alter the content and design without prior warning.

7 Warranty

Содержание Furlex 204TD













































Результаты поиска

Содержание Furlex 204TD

Отзывы:

Похожие инструкции для Furlex 204TD

Бренды по названию

Популярные бренды

Selden Furlex 204TD, Руководство пользователя

Результаты поиска

Содержание Furlex 204TD

Отзывы:

Похожие инструкции для Furlex 204TD

Бренды по названию

Популярные бренды