Selden 472-630-02, Руководство пользователя

Страница: 14 / 28

14
6.
A:
Continue drilling the holes to final size,
using the larger drill-bit.
Drill sizes:
S30/40: Ø7mm
S48/54: Ø9 mm
B:
Continue to drill the holes for the
recommended internal thread diameter.
Clean the hole followed by tapping to correct
thread size.
Drill and tap sizes:
S30/40: Ø5mm drill, M6X1 tap
S48/54: Ø6,8mm drill, M8X1,25 tap
7.
A/B:
Countersink each hole approximately 3 mm
to allow enough marine sealing compound
to be applied to stop water ingress.
8.
A/B:
Remove any masking tape and debris and
proceed to wipe the area down using
acetone or methylated spirits to remove
any grease.
9.
A/B:
Fill the countersunk hole with marine
sealing compound and mount the winch,
ensuring the winch is correctly aligned.