background image

 

1.00 Safety instructions 

 

1.10 Assembly / bringing into service 

Place the appliance in a level, dry and clean area. Make sure that the connecting cables are correctly 
inserted into the power points. The connecting cables should not be kinked or squashed. 
Only original hoses or permitted drinks hoses should be used for wine supply. 
It is important to ensure that the appliance is sufficiently ventilated! No objects should be placed under 
the appliance! 

 
 

Please note the following safety precautions: 
 

 

Temperature operating range +10 to +40 degrees Celsius  

 

Dirt (dust, fibres) should be prevent from entering the appliance 

 

Only connect to the prescribed supply voltage 

 

Protect the appliance against humidity, in particular prevent fluids for entering the appliance 

 

Pay attention to the warnings and safety precautions on the electronic components and in this book 

 

Pay attention to the warnings and service information in these instructions for use 

 

1.20 Safety instructions 

This appliance may only be operated and connected by suitably trained personnel.  Adjustment, 
maintenance and repairs to the appliance when it is open or connected to the electricity supply may only 
be carried out by experts. 
 
As with all technical appliances, problem-free function of this appliance and its operational reliability are 
only guaranteed, if the general safety precautions and particular safety instructions found in these 
operating instructions are adhered to during operation and service.   
 
Serious injury to persons or damage to property may occur if: 
 

 

Appliance is not correctly used 

 

If appliance is incorrectly installed or operated 

 

Necessary safety covers or casing are removed 

 

The appliance is opened during operation 

 

1.21 Unsafe operation 

If, for any reason, it is considered that operation is unsafe, the appliance shall be placed out of 
operation and shall be marked as 'out of order', so that it is not accidentally operated by third parties. 
Customer services should also be informed. 
 
Safety may be compromised if, for example, the appliance is not running as prescribed or is visibly 
damaged.  

 

1.22 Safety instructions 

The appliance may only be operated if correctly earthed.  
 

1.30 Spare parts 

If component assemblies or components are changed, only identical component assemblies or 
components may be used. 

 

Содержание WT 40









Отзывы: