30
2. About broncolor Radio System
●
NOTE
● With broncolor radio system, individual flash triggering is not available for each Lamp
Address. All flashes in the same Studio Address will fire even if a particular Lamp Address is
selected. For measuring the flash individually, turn off the power of flash units not in use.
● When the measured value display area is touched, both flash waveform graph and measured
value are displayed. When it is touched again, the display returns to the previous screen.
● Measure the flash light characteristics in a darkroom without ambient light.
●
To set ISO sensitivity and shutter speed, press the [Flash Duration Analysis Radio
Triggering Mode] Icon (
) to return to the Measuring Screen.
●
The last selected Lamp Address in either Flash Power Control Screen or Radio Studio/
Lamp Screen is activated in Measuring Screen.
●
For radio frequencies, refer to “5. Radio Studio Address Frequencies”. (
[Measuring Screen]
[Flash Duration Analysis
Mode Flash Waveform
Graph Screen]
Touching the
Measured
value area
changes the
display.
*
The graph screen cannot be used to make measurements.
