17
2. About broncolor Radio System
●
8.
With [ALL] Button selected, touch [+]
or [-]
Button.
Press the Measuring Button
6
again.
You can adjust the total power level while the lighting ratio of each Lamp Address
is being fixed.
NOTICE
●
Use the measurement with retracted lumisphere to see the lighting ratio of each lamp
address, and use the extended lumisphere for final exposure.
●
The measurements between extended lumisphere and retracted lumisphere are different
due to light distribution characteristic. When the lumisphere is switched between
extended and retracted status, the measurement on the main display is cleared.
However, on the flash power control screen, the measurements of each lamp address
remain.
●
When the lumisphere is switched between extended and retracted status on any screen
except the flash power control screen, the measurements of each lamp address are all
cleared. Please extend/retract the lumisphere on the flash power control screen.
NOTE
● With broncolor radio system, individual flash triggering is not available for each Lamp
Address. All flashes in the same Studio Address will fire even if a particular Lamp
Address is selected. For measuring the flash individually, turn off the power of flash units
not in use. Or use the retracted lumisphere of L-858D to measure the light in front while
all flashes fire.
●
To set ISO sensitivity and shutter speed, press the [Radio Triggering Flash Mode] Icon
(
) to return to the Measuring Screen.
●
The last selected Lamp Address in either Flash Power Control Screen or Radio Studio/
Lamp Screen in Tool Box is activated in Measuring Screen.
Adjusted Value
[Flash Power Control
Screen]
[Flash Power Control
Screen]
Main Display
[+] Button
[-] Button
[ALL] Button
