Sejin Electron SWR-220U, Руководство пользователя

Страница: 5 / 9

2 Receiver settings
2.1 User ID setting
There are two options for user ID setting. First one is in case the receiver has an optional serial
EEPROM.
Second one is in case the receiver has no the optional serial EEPROM.
2.1.1 User ID setting incase an EEPROM equipped on the receiver
If the receiver has an optional serial EEPROM on the receiver board, the receiver keeps user ID even
though the system power down.
User ID setting procedure:
1. Set the User ID 4 bit Dipswitch located under battery cover on the keyboard side after removing
batteries. To use both the keyboard and the remote control with single receiver, the user must
set the same user ID number for both on the keyboard and on the remote.
2. Press any key or button a few times to discharge internal capacitor and than reinsert batteries.