Thank you very much for purchasing our LED lighting fittings.
Please read this instruction manual to use the product properly.
1) Prior to installing the fitting, check if the product is as per your order.
2) Check for a loose or damaged part due to an accident in transit, etc.
1) The electrical characteristic data is given below.
- Installation work should be done properly by a qualified electrician in accordance with the related laws and the instruction manual.
- For safety, Installation work should be done by at least two workers.
■
Lighting fitting for inside inspection
NB1:
NB2: The mounting brackets are optionally available.
For further i for atio , see Optio : Mou ti g Bracket.
NB:
NB1: Use M8 or larger bolts to mount it on the structure.
NB2:
LCTD1101
81
-N
(5000K)
IP65
Please perform connection of power wires and insulating.
The colors of power wire are white and red. The color of earth
wire is black.
Vapor Tight Type LED Lighting Fittings
LCTD
After installing the product, be sure to hand this manual over to the user of the product.
Model
100-242V AC
50 / 60Hz
Input
Current
Power
Consumption
IP
rating
Mount the lamp house with the attached mounting brackets
on the structure (tank inspection hole, etc.) firmly.
Fig.1
81M -W
11E0001151A11
To be conserved
Instruction Manual
Option
(3000K)
Input Voltage
(Frequency)
0.16-0.07A
When the supplied cross-recessed pan head machine
screws are used, the recommended thickness of the
mounting bracket is 2 to 5 mm.
Mounting Bracket
-M
Prior to use
Performance
Prepare robust mounting brackets to be attached to the lamp
house (fitting) referring to the figure on the right (mounting
hole positions).
Attach and fix the mounting brackets at four places (90 °
pitch) or three places (120° pitch).
Among the 12 cross-recessed pan head machine screws
(M5x12, with plain and spring washers) on the lamp house,
remove as many ones as needed. After removal, attach the
mounting brackets to the lamp house using as many cross-
recessed pan head machine screws as needed.
15.0-15.5W
Names of the Components and Installation Method
Be sure to fix the mounting brackets and lamp house firmly
using the mounting screw holes, though the mounting
bracket height (distance from the tank inspection hole,
etc.) is not limited.
Fig.2
CABLE
HVCT 1.25mm
2
×
3C
(2m)
Mounting bracket (option)
(not supplied)
Lamp house fittings
2
×
6-M5 Mounting screw
holes
Screw
hole depth:8
12 cross-recessed pan head machine screw
M5
×
12
with spring and plain washers(supplied)
- -
