Seitron freetime evo, Руководство пользователя, Страница: 11 / 28

DCD02B2001SE 040429 281122
11
DAILY - WEEKLY PROGRAM SETTING
The programmable thermostat is set to daily mode by factory default.
To set the daily or weekly programming mode of the programmable thermostat, perform the following operations:
1. The display of the programmable thermostat shows the normal operation mode:
WARNING!
The access to the program setting mode IS NOT allowed on the following operations modes:
Off, Pause, Holiday, Manual 24h, Permanent manual.
2. Open the flap, gaining the access to the buttons.
3. Keep the “ “ button pressed for at least 5 seconds; the programmable thermostat, depending on the initial programming mode, switches from
daily mode to weekly mode or vice versa.
If the programmable thermostat is set on weekly program mode, the display shows the weekday number, placed between the segments strip and
the clock / room temperature indicator.
Programmable thermostat set to weekly progrm mode Programmable thermostat set to daily program mode
Weekday number
WARNING!
The first time that the programmable thermostat is set to weekly program mode, it asks to set the clock and the current day of the
week (see chapter “Time - current day regulation“).
TIME - CURRENT DAY REGULATION
In order to set the clock of the programmable thermostats, follow instructions below:
1. Open the flap which gives access to the buttons.
2. Push for at least 2 seconds the button “ “; the display shows “Set CLO” and the hour digits blink.
3. Set the hours by rotating the knob (right=Increase / left=Decrease).
4. Confirm with “ “ or by pushing the knob; the minutes digits blink.
5. Set the minutes by rotating the knob (right=Increase / left=Decrease).
6. Confirm with “ “ or by pushing the knob ; the weekday is blinking.
7. Set the day of the week by turning the knob (to the right = Increase / to the left = Decrease); the selected day of the week flashes (1 Monday ..
7 Sunday).
8. Confirm with “ “ or pressing the knob.
WARNING!
- Setting the day of the week is only possible if the programmable thermostat was previously set to weekly programming.
- If the programmable thermostat has been set in daily programming, it will only be possible to adjust the hour and minutes.
HEATING / COOLING SETTING
Refer to the parameter “H_C” on the section “SETTING USER PARAMETERS”.