Seip Solar FR I, Руководство по установке

Страница: 3 / 12

3
(3)
(1)
(2)
(4)
(5)
Before fitting the operator to the ceiling we recommend you detach the motor-
head unit; mounting the C-rail will then be easier. You will find the instructions on
how to detach the motor-head on page 4.
Measure the distance between the ceiling and the highest point reached by the
garage door (1).
The minimum headroom necessary for mounting the operator is 35 mm. If there is
less headroom please pay attention to page 2.
The front fixing-angle can be mounted either on the lintel or on the ceiling.
1. Measure the middle of your garage-door and make a mark on the lintel and
the top of your door.
2. Fix the front fixing-angle in the middle- either on the lintel or on the ceiling.
(We recommend the lintel if possible).
3. Attach the C-rail to the front fixing-angle (4). Put a piece of cardboard under
the motor-head unit to avoid damage.
4. To fix the motor-head to the ceiling we recommend you use a ladder (5). When
the operator is laying on the ladder you can open the garage-door. Adjust the C-
rail according to the mark you made in the middle of the garage-door.
Fix the operator to the ceiling when you have made sure the C-rail is running
straight to the front.
5. Now fix the door-arm to the garage-door. Take care that the angle between
the operator and the door-arm does not exceed a max. of 45° (it may be less).
6. Before running the operator dismount the doors locking-bolts! Otherwise
the operator cannot open the door and this will lead to damage to your
operator and the garage door.
If you would like additional security you can have door bolts fitted; please ask
your dealer about our locking set, which is available as an optional extra.
MOUNTING
3