13
1 POWER Switch
The POWER Switch turns on or off the printer.
The LED lights when turning on the printer. To turn
the off the printer, hold down the switch for longer
than 3 seconds.
2 FEED Switch
The FEED Switch operates paper feed. When
holding down the switch for a few seconds, the
printer feeds the thermal paper continuously for
the period of held.
3 LED
The LED lights when turning on the printer. See
"LED Display" on the next page for details.
4 Paper outlet
Thermal paper is ejected from here. The cutter is
attached.
5 Release lever
The lever is used to open the paper cover to set
the thermal paper. It is also used to open the
paper cover when a paper jam occurs.
6 Paper cover
The platen is released from the thermal paper
when opening this cover. Open this cover to
replace the thermal paper or to clean the thermal
head.
7 Paper holder
The paper holder holds the thermal paper.
8 Paper-near-end sensor
The paper-near-end sensor detects remaining
paper amount to replace the thermal paper.
9 Paper-near-end sensor setting lever
The lever sets the value to detect the remaining
amount of the thermal paper.
10 Thermal head
The thermal head prints data on the thermal
paper. DO NOT touch the thermal head
immediately after printing because it may get hot.
11 Paper sensor
The sensor detects thermal paper presence.
12 Platen
The platen brings the thermal paper into contact
with the thermal head. The platen is turned to feed
the paper.
13 Cutter
The cutter cuts the thermal paper automatically
after printing. Avoid touching the exposed blade
while the printer cover is open.
14 Power connector
The AC adapter is connected here.
15 Interface connector
The interface cable is connected here.
16 Drawer kick connector
The connector is for connecting the drawer.
Do not connect a phone line.
17 Wire clip
The communication cable can be fixed to prevent
it from being unplugged.