Seiko QP-400GS, Руководство по эксплуатации

Страница: 59 / 76

-
17
-
11
HOW TO USE CLOCK CONTROLLER
11.1 Control Panel
11.1.1 Status indication
The status of the clock controller is indicated.
Indicator Status
AM Lights up when the current time is in the AM period.
PM Lights up when the current time is in the PM period.
0/30
Lights up when the seconds count any number from “0” to “29.”
Turned off when the seconds count any number from “30” to “59.”
LFR Turned off at all times (unused)
GPS
Lights up when the GNSS receiver is connected with the clock controller
properly.
Flashes when the time correction is performed by the GNSS receiver.
SYNC Lights up when the time correction was performed within the past 24 hours.
DST
Lights up when the daylight saving time (summer time) is in effect.
Flashes when the clock controller is on standby for the start or end of the
daylight saving time.
11.1.2 Time display
The current time is displayed. When various types of setting procedure is underway,
corresponding setting items and setting results are displayed.
11.1.3 Operation buttons
Use the buttons to make various types of settings.
Status indication
Time display
Operation buttons