Press the button for 5 seconds and then release it
2
※ Press the
button with a
pointed object.
→ P.96
※ The button cannot be operated
until all the hands stop.
In five seconds after releasing the button, the hour hand starts to move
and stops at the 12 o'clock position. And then the minute hand and the
second hand start to move and stop at the zero second position.
Pressing
the button for
5 seconds and
release
Continue to the next page
Tr
o
u
b
le
s
h
o
o
tin
g
7
159
In case that the watch moves
abnormally or that the watch
does not move at one-second
inter vals even af ter f ully
charging the battery, perform
the procedures from ① - ⑦ for
normal function.
■ Reset the system ( ① - ② )
Pull the crown to the second
click
1
※ Even after pulling the crown, the second
hand continues to move.
In case of an abnormal movement
0 1 2
Pulling
the crown to
the second
click
※ When the crown is
a screw lock type,
unlock it. → P.97
Tr
o
u
b
le
s
h
o
o
tin
g
7
158
Solution
Reference pages
Set the date to the preliminary position 1 (the 1st).
P.160
Sufficiently charge the watch until it starts moving at one-second
intervals.
P.112
Wait without doing anything.
After the date stops, the crown and buttons can be operated.
−
1. If the crown is pulled out, push it back in.
2. The watch will resume its normal one-second interval movements within 5 minutes.
3. Start the setting procedure from the beginning.
−
Contact the retailer from whom the watch was purchased.
−
At trouble
Possible cause
Misalignment
of the date
The reception results are successful
and the precise time is displayed, but
the date is not correctly displayed.
The date is out of the preliminary position.
This happens when the date is out of the preliminary position as a result
of influence of various external sources or after the built-in IC is reset.
Operation
The crown or buttons
cannot be operated.
The stored electric power is running short.
Hands and date are moving right after a setting
is carried out by the crown or button operation.
You get lost in
the middle of the
operation.
−−−−−−−−−−−−−−−−−−−−−−−−
Others
Blur on the dial glass
persists.
Small amount of water has got inside the watch
due to deterioration of the gasket, etc.
Tr
o
u
b
le
s
h
o
o
tin
g
7
157
※ For the solution of troubles other than the above, consult the retailer from whom the watch was purchased.
Solution
Reference pages
Set the date to the preliminary position 1 (the 1st).
P.160
Sufficiently charge the watch until it starts moving at one-second
intervals.
P.112
Wait without doing anything.
After the date stops, the crown and buttons can be operated.
−
1. If the crown is pulled out, push it back in.
2. The watch will resume its normal one-second interval movements within 5 minutes.
3. Start the setting procedure from the beginning.
−
Contact the retailer from whom the watch was purchased.
−
At trouble
Possible cause
Misalignment
of the date
The reception results are successful
and the precise time is displayed, but
the date is not correctly displayed.
The date is out of the preliminary position.
This happens when the date is out of the preliminary position as a result
of influence of various external sources or after the built-in IC is reset.
Operation
The crown or buttons
cannot be operated.
The stored electric power is running short.
Hands and date are moving right after a setting
is carried out by the crown or button operation.
You get lost in
the middle of the
operation.
−−−−−−−−−−−−−−−−−−−−−−−−
Others
Blur on the dial glass
persists.
Small amount of water has got inside the watch
due to deterioration of the gasket, etc.
Tr
o
u
b
le
s
h
o
o
tin
g
7
156
