● Inspection and adjustment by disassembly and cleaning (overhaul)
・ Periodic inspection and adjustment by disassembly and cleaning
(overhaul) is recommended approximately once every 3 to 4 years in order
to maintain optimal performance of the watch for a long time. According
to use conditions, the oil retaining condition of your watch mechanical
parts may deteriorate, abrasion of the parts due to contamination
of oil may advance or delay the time significantly, or the watch itself
may stop. As the parts such as gasket may deteriorate, water-
resistant performance may be impaired due to intrusion of perspiration
and moisture. Please contact the retailer from whom the watch was
purchased for inspection and adjustment by disassembly and cleaning
(overhaul). For replacement of parts, please specify "SEIKO GENUINE
PARTS." When asking for inspection and adjustment by disassembly
and cleaning (overhaul), make sure that the gasket and push pin are also
replaced with new ones.
When your watch is inspected and adjusted by disassembly and cleaning
(overhauled), the movement of your watch may be replaced.
To
P
re
se
rv
e t
he
Q
ua
lit
y o
f Y
ou
r W
at
ch
6
139
・ SEIKO makes it a policy to typically keep a stock of replacement parts for
this watch for 7 years. Replacement parts are those which are essential
to maintaining the functional integrity of the watch. Please keep in
mind that if original parts are not available, they may be replaced with
substitutes whose outward appearance may differ from the originals.
・ Contact the retailer from whom the watch was purchased or SEIKO
CUSTOMER SERVICE CENTER for repair or overhaul.
・ Within the guarantee period, present the certificate of guarantee to
receive repair services.
・ Guarantee coverage is provided in the certificate of guarantee. Read
carefully and retain it.
・ For repair services after the guarantee period has expired, if the functions of the watch can
be restored by repair work, we will undertake repair services upon request and payment.
● Notes on guarantee and repair
● Replacement parts
After-sales service
To
P
re
se
rv
e t
he
Q
ua
lit
y o
f Y
ou
r W
at
ch
6
138
※ Refer to "Standard charging time" on page 113 to check the time required for fully charging the watch.
When the secondary battery is fully charged, the overcharge prevention function
is automatically activated to avoid further charging. There is no need to worry
about damage caused by overcharging no matter how much the secondary
battery is charged in excess of the "time required for fully charging the watch".
※ Overcharge prevention function
■ Notes on charging the watch
・ When charging the watch, do not place the watch in close proximity
to an intense light source such as lighting equipment for photography,
spotlights or incandescent lights, as the watch may be excessively heated
resulting in damage to its internal parts.
・ When charging the watch by exposure to direct sunlight, avoid places that
easily reach high temperatures, such as a car dashboard.
・ Always keep the watch temperature under 60℃ .
NOTICE
To
P
re
se
rv
e t
he
Q
ua
lit
y o
f Y
ou
r W
at
ch
6
137
Power Source
The battery used in this watch is a special secondary battery, which is totally different from ordinary silver oxide batteries.
Unlike other disposable batteries such as dry-cell batteries or button cells, this secondary battery can be used over and
over again by repeating the cycles of discharging and recharging.
However, for various reasons such as long-term use or usage conditions, the capacity or recharging efficiency of the
secondary battery may gradually deteriorate. Worn or contaminated mechanical parts or degraded oils may also shorten
recharging cycles. If the efficiency of the secondary battery decreases, have the watch repaired.
■ Remarks on replacing the secondary battery
・ Do not remove the secondary battery yourself.
・ Replacement of the secondary battery requires professional
knowledge and skill. Please ask the retailer from whom the watch
was purchased for repair.
・ Installation of an ordinary silver oxide battery can generate heat that can
cause bursting or ignition.
NOTICE
To
P
re
se
rv
e t
he
Q
ua
lit
y o
f Y
ou
r W
at
ch
6
136
