background image

32

ASTRON  8X53  GPS SOLAR

          

CONTENTS

IN CASE OF AN UNUSUAL MOVEMENT OF THE SECOND HAND

5

Second hand movement and watch state (energy depletion forewarning function)

Continued on the 

following page

2-second interval movement

5-second interval movement

State

The second hand moves at 2-second intervals.

The second hand moves at 5-second intervals.

Restriction on function/

display

•  Reception is not started even with operation of GPS signal 

reception.

•  Automatic time adjustment does not work.

•  The hour hand, minute hand, date, and sub-dial stop.
•  Reception is not started even with operation of GPS signal 

reception.

•  Automatic time adjustment does not work.

Solution

(1) First, charge the watch by expose to light until the second hand 

moves at 1-second intervals.

  

 How to charge the watch  

P. 14

(2) Keep in mind to charge the watch until the indicator hand points 

to the middle position or full position. (If the indicator hand 
points to low position, GPS signals cannot be received.) 

  

 Check the charging status  

P. 13

(1) Charge the watch until the indicator hand points to the middle 

position or full position. 

  

 Check the charging status  

P. 13

(2) Carry out time zone adjustment to set the time.

  

 How to adjust the time zone  

P. 18

Movement of the second hand shows the state of the watch (working functions).

 2-second interval movement/5-second interval movement are brought about

When the energy stored in the watch runs low, the energy depletion forewarning function will work. 

When the energy stored in the watch runs low, charge the watch by expose to light.  

 How to charge the watch  

P. 14

 When the energy depletion forewarning function works, the watch does not operate even with operation of the buttons and crown. 

(Be assured that it does not mean a failure)

Содержание ASTRON



























































Отзывы: