Seiko 6R15, Инструкция по эксплуатации

Страница: 22 / 23

TROUBLESHOOTING
Turn the crown or swing the watch to wind it
up. The watch will start operating. If the watch
not, consult the retailer from whom the watch
was purchased.
The watch is not wound up
sufficiently.
The watch stops
operating.
Advance the hands by 12 hours. AM/PM is not properly set. The date changes at
12 o'clock noon.
Consult the retailer from whom the watch was
purchased.
Water got inside the watch due to
the deterioration of the gasket, etc.
The glass is blurred and the
blur persists for a long time.
The normal accuracy will resume when the watch is
kept away from close contact with the magnetic source.
If this condition persists, consult the retailer from whom
the watch was purchased.
The watch was brought into
close contact with a magnetic
object.
The normal accuracy will not resume. Consult
the retailer from whom the watch was
purchased.
You dropped the watch, hit it
against a hard surface or wore it
while playing active sports.
The watch was exposed to strong
vibrations.
Consult the retailer from whom the watch was
purchased.
The watch has not been overhauled
for more than 3 years.
The normal accuracy will resume when the
watch returns to normal temperature.
The watch has been left in extremely high or
low temperatures for a long time.
The watch gains/
loses temporarily.
Problem Possible cause Solution
※For the solution of troubles other than listed above, contact the retailer from whom the watch was purchased.
85
LUMIBRITE
[IF YOUR WATCH HAS LUMIBRITE]
LumiBrite is a luminous paint that is completely harmless to human beings and natural en-
vironment, containing no noxious materials such as radioactive substance.
LumiBrite is a newly-developed luminous paint that absorbs the light energy of the sunlight
and lighting apparatus in a short time and stores it to emit light in the dark.
For example, if exposed to a light of more than 500 lux for approximately 10 minutes,
LumiBrite can emit light for 5 to 8 hours. Please note, however, that, as LumiBrite emits
the light it stores, the luminance level of the light decreases gradually over time. The dura-
tion of the emitted light may also differ slightly depending on such factors as the bright-
ness of the place where the watch is exposed to light and the distance from the light
source to the watch.
<Reference data on the luminance>
(A) Sunlight
[Fine weather]: 100,000 lux [Cloudy weather]: 10,000 lux
(B) Indoor (Window-side during daytime)
[Fine weather]: more than 3,000 lux [Cloudy weather]: 1,000 to 3,000 lux
[Rainy weather]: less than 1,000 lux
(C) Lighting apparatus (40-watt daylight fluorescent light)
[Distance to the watch: 1m]: 1,000 lux
[Distance to the watch: 3m]: 500 lux (average room luminance) [Distance to the watch: 4m]: 250 lux
84
Push button
Pins
Adjustment hole
） Press the button on the buckle, and
lift to open the clasp.
） To adjust : Pull the pins out of the
adjustment holes on the band. Slide
the band to the appropriate length.
Push the pins into the new holes on
the band.
Type
83
Pin
Adjustment hole
） Pull the pin out of a adjustment hole
of the band. Slide the band to adjust
its length and find an appropriate
hole. Place the pin into the hole.
） Fasten the buckle with pressing the
push buttons.
82