75
74
Model without a 24-hour hand
①Pull out the crown to
second click when the
second hand is at the 12
o'clock position since the
second hand will be
stopping on the spot.
(For models with screw lock type
crown, unscrew the crown by
turning it counterclockwise, and
then pull it out to second click.)
②Turn the crown to set the hour and minute hands to the desired
time. The date may be altered here, however it can be adjusted
separately later. Refer to "Date setting" for details.
When setting the hour hand, make sure that AM/PM is set
correctly (The date changes once every 24 hours.) If AM/PM is
set in error, the date will change at 12:00' noon to show the
wrong date as a result.
＊The moment the date changes it is midnight.
＊The mechanism of quartz watches is different from that of mechanical ones. To
set the time accurately, advance it 4 to 5 minutes ahead of the desired time and
then turn it back to the exact time.
＊The telephone time signal service (117) is helpful in setting the exact time.
6
6
6
6
⑦. Push the crown back in upon completion of time setting. For models
with screw lock type crown, screw it in completely by turning it
clockwise while pressing it.
The time setting for this type is completed.
You can conveniently check the time of a specific time zone area with the 24-hour hand at any
time while displaying the current time of your area with the hour and minute hands.
When readjusting the time indicated by the 24-hour hand, repeat the steps for this type starting
from Step 1. For various time zones of the world, please refer to "Time differences table" for
details.