Seiki SC-6200AU6A, Инструкция по эксплуатации

Страница: 4 / 16

4
Read this manual thoroughly before you start using the Split system air con.
Store this manual, the completed warranty card, your receipt and the product packaging.
The safety precautions instructions reduces the risk of fire, electric shock and injury when
correctly complied to.
Please follow all instructions and take notice of all warnings.
GENERAL SAFETY
Please follow instruction when installing this product
in accordance with the instruction
manual. This product must be positioned in a sufficiently stable location, it can be potentially
hazardous due to falling when mounted and can cause injury, particularly to children if it
positioned incorrectly.
• Before installing this Aircon, make sure your outlet voltage corresponds to the voltage
stated on the power supply rating label
• Do not use a damaged power cord, plug or loose outlet. Doing so may cause an
electric shock.
• Do not plug several devices into the same outlet. Doing so may cause the outlet to
overheat and start a fire. Make sure the outlet is readily accessible during operation
of the equipment.
• Do not bend, twist or kink the power cord excessively.
• Do not allow anything to rest on or roll over the power cord.
Doing so may cause a fire or an electric shock.
• Do not run the power cord near heat-producing appliances such as radiators, stoves or
irons. The excessive heat could melt the insulation and expose live wires, resulting in
fire or electric shock.
• Do not expose the air conditioner to water. The electrical insulation could be damaged
and cause electrocution. Do not touch the unit when barefoot or parts of your body are
wet or damp.
• Do not cover the ventilation openings of the product with items such as newspapers,
tablecloths, curtains etc or insert objects into the slots available on the products.
As this could result in the product temperature rising and could cause a fire.
This unit comes with seperate manual on installation for use by an appropriately
qualified installer. Do not try to install on your own, this will expose you to danger and
void the warranty. It is your responsibility to ensure the unit is installed bu a qualified
technician, they should check that it is earthed in accordance with regulations and
install a thermomagnetic circuit breaker.
IMPORTANT INFORMATION