SEIKAKU TECHNICAL GROUP RIO200, Руководство пользователя

Страница: 11 / 12

SOFTWARE CONTROL
ID modification
Right click on the “DeviceID” position, the function menu popped up as shown; click
“Change DeviceID” , then enter the number(4 bit) you wanted in the text box, finally click
OK to save and to take effect.
Note: The first time to use the whole system, initial work to assign ID for each device is
necessary for its functioning.
9
Please use high rated network cable to connect the Ethernet port of PC and the LAN port
of serve host device. Then run MatrixSystemEditor, make sure the IP is linked rightly by the
remarks given by dialogs. At the main interface, you can drag the device in the left column
to the right area, it is the operation to add a device. Please make sure the device you added
is physically linked, or there would be no effects even if all settings are saved. Double click
for specific operation, here we add a RIO200.
If the device is connected properly, the gray rectangle in the left middle would turn to green.
Device rename
Double click on the device block, and the click the “CHANGE DEVICE NAME” on the
shown dialog, another window popped up, enter the name you wanted to textbox and click
“Submit” button to save.( Please make sure the name can only consist of alphabets,
numbers and common symbols.)
AUDIO MATRIX