Rapid 220 - Site Preparation Guide
Rapid 220 Site Preparation Guide
4
Characteristics of the floor
The floor of the work area must have the following characteristics:
(*)max pressure applied to each main foot
(**) Further details and recommendations are provided in this section
Uniform load capacity:
5kN/m
2
(500 kgf/m
2
or 100 psf)
Concentrated load(*):
0.91 MPa (0.91 N/mm
2
)
Floor surface planarity
: 5 mm/m
Characteristics of the
floor (**):
The floor must be stiff without
any air chamber between the
surface and the building
structure.
The floor must not be covered
by elastic material like fitted
carpet or some kind of rubber
ESD floor.
