OC9665R0TX
Sewing Table-White
Assembly Instruction
Step 1:
Tighten wood screws (11) through
hinges (12) into predrilled holes on
underside of large top panel and
leaf panel (A) and (B) as shown.
Step 2:
Insert wood dowel (1) into
predrilled hole on bottom edge of
divider (J) and fit into
corresponding hole on lower shelf
(D). Insert T-bolt (6) into hole on
divider (J) ensuring the slots for the
screwdriver are facing out and
visible. Insert large machine screw
(5) through predrilled hole on lower
shelf (D) and into the middle
thread in T-bolt (6).
Please note, if screw does not
tighten, adjust T-bolt using
screwdriver until the thread in the
T-bolt (6) and large machine screw
(5) align.
Slide upper shelf(C) into groove on
diver (J) as shown.
