Figure 5
Use screws (9) and wood dowels (3) to
connect bottom cross panel (G) to
bottom panel (F).
Tighten screws (9) with Philips
screwdriver.
Figure 6
Insert cam locks (2) into holes on
assembled unit from figure 3 and
assembled unit from figure 5.
Screw cam bolts (1) into holes on right
side panel (C).
Attach assembled unit from figure 3 and
assembled unit from figure 5 to right
side panel (C) by inserting wood dowels
(3) and cam bolts (1) into corresponding
holes until assembled unit from figure 3,
assembled unit from figure 5, and right
side panel (C) meet.
Tighten by rotating cam locks (2)
clockwise with Phillips screwdriver.
Use bolts (5), lock washers (6), flat
washers (7), and wood dowels (3) to
connect assembled unit from figure 4 to
right side panel (C).
Tighten bolts (5) with Allen wrench (8).
